FLAMESHIELD SIZES & CONFIG.


FLAMESHIELD SIZES & CONFIGURATION

A cost efficient secondary storage solution. The outer tank is a 300 degree tight wrap with an interstitial space at each end for optional leak detection equipment. Complete factory assembled systems are
available for bulk fuel oil, waste oil, and lubricants.

Features:

  • Constructed to the requirements of Steel Tank Institute F921®, Appendix D and UL® 142.
  • Tested by Southwest Research Institute to SwRI 97-04 requirements for fire-resistant tank performance.
  • Complies with NFPA 30A fire-resistant tank performance.
  • Available with a 30 year warranty.
  • Standard openings are female NPT, along tank top centerline.
  • Exterior coating is a marine grade epoxy. Interior is bare steel.
  • Custom tanks, including special interior and/or exterior coatings, are available.
  • Slides in and out of aircraft for easy air shipping to remote locations. ("Hercable")
  • Dimensions and weights are approximate.
  • Designed for stationary use only.
Anchorage Tank Model Number Nominal Capacity Gallons Steel Gauge Diameter (Outer Tank) Length (Outer Tank) Approx. Weight (lbs.)
AT5CFS 500 10 GA 50" 6'-0" 2,153
AT1MFS 1,000 10 GA 64" 7'-0" 2,863
AT15CFS 2,000 3/16 64 10'-0" 4,222
AT2MFS 3,000 3/16 64" 13'-0" 5,118
AT3MFS 3,500 3/16 76 14'-0" 6,327
AT4MFS 4,000 3/16 76 18'-0" 7,656
AT5MFS 5,000 1/4" 96" 15'-0" 10,193
AT6MFS 6,000 1/4" 96" 18'-0" 11,811
AT75CFS 7,500 1/4" 96" 21'-0" 13,227
AT8MFS 8,000 1/4" 96" 23'-0" 14,090
AT10MFS 10,000 1/4" 96" 28'-8" 17,897